Bogføringsloven for repair shops — the plain-English guide.

The Danish Bookkeeping Act — bogføringsloven — is short, strict, and takes down more repair shops at SKAT inspection than every other regulation combined. Here's what §§4-5 actually require, what the 2024 digital-bookkeeping rules changed, and the clean way to stay compliant without spending a weekend on it.

tl;dr

Every invoice you issue needs a sequential number with no gaps. Every invoice and supporting document stays retrievable for 5 years in a form nobody can edit. Since July 2024, most businesses must do bookkeeping in a digital system meeting Erhvervsstyrelsen's technical standards. The practical consequence for a repair shop: the moment you issue invoice 1001, you've committed to issuing 1002 next — not later, not skipped, not deleted.

What the Act is

Bogføringsloven is Denmark's general bookkeeping and record-keeping law. The current version — significantly tightened in the 2022 reform and phased in through 2024 — applies to every business that's registered for VAT in Denmark, with narrower exemptions for very small operators. For a repair shop with a POS and invoices, it absolutely applies.

The whole Act is 70+ paragraphs, but the two that drive your day-to-day operations are §4 and §5. §4 says you must keep complete bookkeeping. §5 defines what "complete" means in practice.

"Virksomheder skal bogføre alle transaktioner nøjagtigt og snarest muligt efter, at de forhold foreligger, der ligger til grund for registreringerne." Bogføringsloven §4, stk. 1 — complete and prompt bookkeeping of every transaction

§5 and what it means for invoicing

The invoicing consequence of §5 is sequential numbering with no gaps. Your invoices run 1001, 1002, 1003, 1004 and so on — never 1001, 1002, 1004 with 1003 missing. If a customer disputes an invoice and you cancel it, 1003 stays in the record as a cancelled invoice; you don't delete it and re-use the number.

Why does SKAT care? Because gaps are the easiest signal of under-reported revenue in the world. If you issued 1003 and it's missing, the obvious guess is that you took cash, pocketed it, and binned the invoice. SKAT doesn't have to prove it — the gap alone is enough to open a wider inspection, and the burden of explaining falls on you.

Credit notes have their own sequence

Credit notes (kreditnotaer) don't share the invoice sequence. A credit against invoice 1004 might be C-0045 or K-2026-0045 — any format you like, as long as it's its own gap-free series. The credit note references the invoice it offsets, and both sides stay visible in the audit trail.

Deposits and part-payments

A deposit (depositum) you take at ticket intake isn't yet an invoice if the repair isn't done — it's a prepayment. When the repair is finished, you issue the actual invoice for the full amount and apply the deposit to it. Your bookkeeping needs the deposit entry, the final invoice, and the application link between them. If you accidentally issue two invoices for the same job (one for the deposit, one for the balance) that's not a gap — it's a mess, but it's compliant.

5-year immutable retention

Every invoice, credit note, Z-report, moms rapport, supporting document and bookkeeping entry must be kept for five years from the end of the financial year in which it was issued. In a form that cannot be altered after the fact. If you issue an invoice on 15 March 2026, you must be able to produce the exact original (or a byte-identical digital copy) through at least 31 December 2031.

"Cannot be altered" is the operative phrase. A PDF saved to Dropbox technically meets the requirement, but if you can open it, re-edit it, and save it over the original — SKAT can argue the audit trail isn't preserved. A proper digital bookkeeping system puts invoices in append-only storage: you can issue, cancel or credit, but you cannot rewrite history.

"Bogføringsmateriale skal opbevares i 5 år fra udgangen af det regnskabsår, hvor det vedrører." Bogføringsloven §12, stk. 1 — 5-year retention

The 2024 digital-bookkeeping requirement

As of 1 July 2024, most VAT-registered businesses in Denmark must use a digital bookkeeping system. Fully manual paper bookkeeping — a bound ledger with hand-written entries — is no longer compliant for new businesses, and existing paper-based businesses had phased transition deadlines through 2024-2025.

The Act splits qualifying systems into two tracks:

  1. Standard digital bookkeeping systems approved and registered with Erhvervsstyrelsen (the Danish Business Authority). The authority maintains a public list. Most Danish accounting products — e-conomic, Dinero, Billy, Uniconta — are on it.
  2. Specific digital bookkeeping systems you use that meet the technical criteria in the Act itself: automated backup, immutable audit trail, support for SAF-T export, documented security practices, and so on.

For a repair shop, the pragmatic reading: use an accounting system from the approved list for your general ledger, and use a POS/invoicing system (like a1RepairFlow) that integrates cleanly with it and meets the Act's technical requirements on the invoice-issuance side. The combination is compliant; neither alone is.

What SAF-T means for you: SAF-T (Standard Audit File — Tax) is an XML format SKAT can ask for during an inspection. It's a complete export of your bookkeeping dataset — chart of accounts, journal entries, customers, suppliers, invoices, VAT codes, in one file. You don't produce it monthly; you produce it on demand when SKAT asks. Your bookkeeping system has to be able to generate it. All the systems above can.

What SKAT actually looks at in an inspection

From our conversations with Danish repair-shop owners who've been through one, the inspector usually works through roughly this list in order:

  1. The invoice sequence. Pick a random month. Pull every invoice number in order. Any gaps? If so, where are they?
  2. Supporting documents. Pick 10 invoices at random. For each, show the matching ticket, parts cost, labour time, and payment record. The audit trail must link cleanly from invoice → source transaction.
  3. Z-reports. Produce the daily Z-report for a specific trading day. Does the total match that day's invoices and payment-method breakdown?
  4. Brugtmoms journal. If you do used-device trade-ins, show the brugtmoms purchase + resale journal for the period under inspection. See the brugtmoms guide for what SKAT expects there.
  5. Moms rapport. Show the monthly VAT report. Does it reconcile with the invoice sequence and the Z-reports? Is the brugtmoms portion separated correctly from normal-VAT turnover?
  6. Retention. Pick an invoice from four years ago. Can you still retrieve it? Is it byte-identical to what was originally issued?

A compliant digital system answers all six in minutes. A spreadsheet-plus-folder-of-PDFs setup answers them in hours — and misses one or two.

How a1RepairFlow enforces §§4-5

Invoice compliance isn't an optional feature in the product. It's a hard rule that shapes how the data model works:

The 5-minute compliance checklist

  1. Invoice numbers run sequentially with no gaps (voided invoices stay in the sequence as cancelled records).
  2. Credit notes have their own sequential series, always linked to the original invoice.
  3. Every invoice is retrievable for at least 5 years from the end of its financial year, byte-identical to the original.
  4. Your bookkeeping system is on the Erhvervsstyrelsen list, or meets the Act's technical standards and your accountant has confirmed so in writing.
  5. You can produce a SAF-T export of any period on request.
  6. Daily Z-reports reconcile to the invoice sequence and the moms rapport for the period.

Tick those six, and bogføringsloven inspections become a formality. Miss any one, and the day SKAT shows up is the day a routine inspection becomes a problem.

Compliance by default, not by effort.

a1RepairFlow makes §§4-5 compliance the only possible path — no manual override, no edit history, no gaps. 14-day Pro-tier free trial.

Start free trial →